- 【Illuminate the dark road】8 Brighter LED Nodes,160 luminous flux and you will no longer be stumbling in the dark!
- 【Sensitive Motion Sensor】Sensor range: 3.5 meters (from the front of the panel) it has motion detection and when triggered will turn on and off again after about 15 seconds
- 【Energy Saving /Enc-friendly】Charged by solar energy during the day and works about 8 hours at night, white light to illuminate our pathways for safety or to welcome visitors. All is free!
- 【Easy to Install】There are two “blunt” screws, which hold it to the wall plate, two more screws to attach this plate to the wall, a small probe is used to turn the light on/off
- 【Widely Application】The Solar Motion Sensor can illuminate your home, yard, driveway, patio, shed or remote areas where no electricity is available (But a sunny place)
The Solar Motion Sensor Light can illuminate your home, yard, driveway, patio, shed or remote areas where no electricity is available, it works with normal daylight, but of cause more light is better. It’s waterproof, so you can let it outside without problems.
No battery needed, no annoying strings. Mounts in seconds! Just peel and stick to any hard surface!
A: Just peel and stick to any surface.
B: Use the included expansion pillar-hinge and screw to mount the device.
1. Solar panel: 0.55W, 17% Efficiency
2. Li-ion Battery: 3.7V 600mAh
3. Switch inside for saving energy during transport
4. LED: 1.6 W
5. Lumen: 160lm
6. LED span life: 50,000 hours
7. Solar Charging time: 8 hours
8. Lighting mode: Dark / DIM / bright
9. Automatic identification day or night
10. Protective function: over charging, over discharging, over current, short circuit
11. Li-ion battery span life: 500 circles
12. solar panel span life: more than 5 years
1 x Key Pin
1 x English User Manual
1 x Solar motion sensor light
2 x Screw with expansion pillar-hinge